Page 2 of 4

Re: SWR Sweeper PC Board version 1.0

PostPosted: Thu May 01, 2014 5:21 am
by w6akb
I probably should wait till they are in hand so there won't be any surprise cost changes.

Thanks,

Re: SWR Sweeper PC Board version 1.0

PostPosted: Thu May 22, 2014 5:23 am
by w6akb
PC Boards are somewhere in the mail, supposedly.

Re: SWR Sweeper PC Board version 1.0

PostPosted: Thu May 22, 2014 12:07 pm
by KD4VVC
Sounds good. I just received two dds-60's , and sustaining to gather the rest of the components. Thanks for the update.

Scott

Re: SWR Sweeper PC Board version 1.0

PostPosted: Thu May 22, 2014 3:23 pm
by W7KV
Awesome. I ordered two more DDS-60's that are in the mail also.

John

Re: SWR Sweeper PC Board version 1.0

PostPosted: Sun May 25, 2014 2:54 am
by kd7eir
I would be interested in one or two boards as well.

Re: SWR Sweeper PC Board version 1.0

PostPosted: Sun May 25, 2014 5:07 am
by w6akb
Image

I have good news, and not so good news.

The good news is the boards have arrived, as you can see.

The not so good news is I don't have time to check one out, and there are a fairly limited number of them. When I ordered them there were very few requests, but the number seems to be increasing rapidly, and delivery took longer than expected.

One other piece of good news is that the earlier run of boards was tested by at least one person and found to work, and this run used the same Gerber files, but a different PCB vendor.

So take that into consideration. I will order a larger run of boards as soon as we have further confirmation that these are good.

Anyone wanting one of these boards can drop me an email and we'll handle it by PayPal. See the first posting for details.

Thanks for your interest,

Re: SWR Sweeper PC Board version 1.0

PostPosted: Wed Jun 04, 2014 12:09 am
by K0PER
What are the values of cap C4 and resistor R7 on the Sweeper board? The rest are in the book and on the project website, but those two are not. Are they unused locations, or do they need to be populated?

Thanks
--Shaun, K0PER

Re: SWR Sweeper PC Board version 1.0

PostPosted: Wed Jun 04, 2014 3:12 am
by w6akb
K0PER wrote:What are the values of cap C4 and resistor R7 on the Sweeper board? The rest are in the book and on the project website, but those two are not. Are they unused locations, or do they need to be populated?

Thanks
--Shaun, K0PER


Thanks for the good questions Shaun,


I have moved my response about these and other components on the PC board to the first posting of this thread rather than make them hard to find buried in the thread. Please refer there for these details.


73, Alan, w6akb

Re: SWR Sweeper PC Board version 1.0

PostPosted: Tue Jul 29, 2014 7:40 am
by VK4KL
Allen would you post the boards to VK?

Adrian

Re: SWR Sweeper PC Board version 1.0

PostPosted: Tue Jul 29, 2014 2:03 pm
by w6akb
We can send boards to VK. I updated the first posting with sales info to make it easier to find. I have a few boards left.